Alamat Situs Gratisan / Free

Situs Freeware, Free Software/ software gratisan…ya coba aja (ada yang mo nambahin silakan aja….)
http://www.planet-source-code.com ->Free Download source code/Script
http://www.phazeddl.com/== Free software download
http://osx.portraitofakite.com/index2.htm ==Free Them macinthos

Kumpulan SN/Serial Number WIN XP

Koleksi Serial Number (SN,S/N) Software/Serial Number Collection
Win XP Home OEM: JQ4T4-8VM63-6WFBK-KTT29-V8966
Win XP Home Retail: RH6M6-7PPK4-YR86H-YFFFX-PW8M8
Win XP Home Upgrade: RH6M6-7PPK4-YR86H-YFFFX-PW8M8
Win XP Media Center 2005:C4BH3-P4J7W-9MT6X-PGKC8-J4JTM
Win XP Prof Corp: XP8BF-F8HPF-PY6BX-K24PJ-TWT6M
Win XP Prof OEM: XJM6Q-BQ8HW-T6DFB-Y934T-YD4YT
Win XP Prof Retail: CD87T-HFP4C-V7X7H-8VY68-W7D7M
Win XP Prof Upgrade: CD87T-HFP4C-V7X7H-8VY68-W7D7M Run WPA_Kill.exe (in TOOLS\CRACK) to disable activation in non-corporate installs. CD NR 17 815
Windows 2000 Powered Network Attached Storage ( NAS ) SN:: RBDC9-VTRC8-D7972-J97JY-PRVMG CD NR 17 515 Microsoft Windows XP Professional Reduced Media Edition CD NR 17 516

Cara Mengetahui Versi Linux

Tips simpel, bagaimana mengetahui versi linux Anda. Dengan mengetahui versi distro linux yang Anda kelola, Anda bisa menginstall repo yang tepat untuk linux Anda.

Debian

cat /etc/debian_version

BlankOn

lsb_release -a

CentOS

cat /etc/redhat-release

Fedora

cat /etc/fedora-release

Gentoo

cat /etc/gentoo-release

OpenSUSE

cat /etc/SuSE-release

RedHat

cat /etc/redhat-release

Slackware

cat /etc/slackware-version

Ubuntu

lsb_release -a

Ada distro favorit Anda yang terlewat? tinggalkan pesan di komentar komputerdasar.blogspot.com okay kawan?

Setup Cisco Catalyst 2960

C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4)
Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.
2960-24TT starting…
Base ethernet MAC Address: 0002.175C.B6D5
Xmodem file system is available.
Initializing Flash…
flashfs[0]: 1 files, 0 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 64016384
flashfs[0]: Bytes used: 4414921
flashfs[0]: Bytes available: 59601463
flashfs[0]: flashfs fsck took 1 seconds.
…done Initializing Flash.

Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4

Loading “flash:/c2960-lanbase-mz.122-25.FX.bin”…
######################################### [OK]
Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software – Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 12-Oct-05 22:05 by pt_team
Image text-base: 0×80008098, data-base: 0×814129C4

Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.

24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)

64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 0002.175C.B6D5
Motherboard assembly number : 73-9832-06
Power supply part number : 341-0097-02
Motherboard serial number : FOC103248MJ
Power supply serial number : DCA102133JA
Model revision number : B0
Motherboard revision number : C0
Model number : WS-C2960-24TT
System serial number : FOC1033Z1EY
Top Assembly Part Number : 800-26671-02
Top Assembly Revision Number : B0
Version ID : V02
CLEI Code Number : COM3K00BRA
Hardware Board Revision Number : 0×01

Switch Ports Model SW Version SW Image
—— —– —– ———- ———-
* 1 26 WS-C2960-24TT 12.2 C2960-LANBASE-M

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 12-Oct-05 22:05 by pt_team

Press RETURN to get started!

Switch>ena
Switch#s
Switch#se
Switch#setup
Switch#setup
Switch#setup ?

Switch#setup

— System Configuration Dialog —

Continue with configuration dialog? [yes/no]: yes

At any point you may enter a question mark ‘?’ for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets ‘[]‘.

Basic management setup configures only enough connectivity
for management of the system, extended setup will ask you
to configure each interface on the system

Would you like to enter basic management setup? [yes/no]: yes
Configuring global parameters:

Enter host name [Switch]: helmstandart

The enable secret is a password used to protect access to
privileged EXEC and configuration modes. This password, after
entered, becomes encrypted in the configuration.
Enter enable secret: rhino

The enable password is used when you do not specify an
enable secret password, with some older software versions, and
some boot images.
Enter enable password: rhino
% Please choose a password that is different from the enable secret
Enter enable password: cakep

The virtual terminal password is used to protect
access to the router over a network interface.
Enter virtual terminal password: cakep
Configure SNMP Network Management? [yes]:
% This version of Packet Tracer does not support SNMP management setup.
Configure SNMP Network Management? [yes]:yes
% This version of Packet Tracer does not support SNMP management setup.
Configure SNMP Network Management? [yes]:no
Configuring interface parameters:

Do you want to configure Vlan1 interface? [yes]:yes
Configure IP on this interface? [yes]: yes
IP address for this interface: 192.168.0.101
Subnet mask for this interface [255.255.255.0] : 255.255.255.0
Would you like to enable as a cluster command switch? [yes/no]:no

The following configuration command script was created:

!
hostname helmstandart
enable secret 5 $1$mERr$oU7khLPiPJy4.lkjTjSAT/
enable password cakep
line vty 0 4
password cakep
!
interface Vlan1
ip address 192.168.0.101 255.255.255.0
!
interface FastEthernet0/1
no ip address
!
interface FastEthernet0/2
no ip address
!
interface FastEthernet0/3
no ip address
!
interface FastEthernet0/4
no ip address
!
interface FastEthernet0/5
no ip address
!
interface FastEthernet0/6
no ip address
!
interface FastEthernet0/7
no ip address
!
interface FastEthernet0/8
no ip address
!
interface FastEthernet0/9
no ip address
!
interface FastEthernet0/10
no ip address
!
interface FastEthernet0/11
no ip address
!
interface FastEthernet0/12
no ip address
!
interface FastEthernet0/13
no ip address
!
interface FastEthernet0/14
no ip address
!
interface FastEthernet0/15
no ip address
!
interface FastEthernet0/16
no ip address
!
interface FastEthernet0/17
no ip address
!
interface FastEthernet0/18
no ip address
!
interface FastEthernet0/19
no ip address
!
interface FastEthernet0/20
no ip address
!
interface FastEthernet0/21
no ip address
!
interface FastEthernet0/22
no ip address
!
interface FastEthernet0/23
no ip address
!
interface FastEthernet0/24
no ip address
!
interface GigabitEthernet1/1
no ip address
!
interface GigabitEthernet1/2
no ip address
!
end

[0] Go to the IOS command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit.

Enter your selection [2]: 2
Building configuration…
[OK]
Use the enabled mode ‘configure’ command to modify this configuration.

helmstandart#

Buka Command Prompt

Tips membuka Command Prompt

Command Prompt bisa sangat bermanfaat di situasi seperti disaat mendesak, misalnya menjalankan ping connection disaat lamberto, liat ip add, mac add, file COM, BAT, membuka registry Editor atau men-copy (me-rename) files.
contoh kecil Untuk merename file dengan command prompt, bisa digunakan perintah seperti berikut :

ren file_1.exe file_1.scr ( akan me-rename file_1.exe menjadi file_1.scr)
copy file_1.exe file_1.com ( akan meng-copy file_1.exe dan menghasilkan file_1.com)

tapi lebih menjengkelkan lagi disaat kita mau lakukan hal-hal yang helmstandart diatas sebutkan tadi, command Prompt tidak bisa di buka..glodak, boro boro lakuin buka aja ga bisa ... ya ga?
Jika command Prompt tidak bisa di buka melalui menu Accessories. Ada tips yang bisa dilakukan untuk membuka Command Prompt. Caranya sebagai berikut :

1. Buka Task manager (Ctrl+Alt+Del)
2. Arahkan mouse ke Menu File > New Task (Run…)
3. Klik menu New Task (Run…), sambil menekan tombol Ctrl
4. Seharusnya akan ditampilkan Command Prompt

Jika mempunyai masukan atau cara lainnya silahkan ditambahkan, mungkin bisa lebih melengkapi mengenai cara lain buka Command Prompt
okay sobat gitu dulu deh tips nya..